Species sinks manufacturers available in a great way today. They differ not only in appearance, size but also on the material that they are made of cast iron, stainless steel, enameled steel, earthenware, ceramics or glass fiber plastic (shell).
Structurally, sinks and washbasin is not very different from each other. All of them are with a shelf plate. The plate has a hole for water drainage and for shelf located pipe fittings. Particular attention should be paid to whether there is a hole on the shelf for the taps. This should be considered, as this determines whether the mixer is mounted on the wall or directly on the shell. To connect the sink and china pedestal sink with sewage pipes, it includes so called releases that is made of bronze or plastic. These issues are fixed to the siphon.
In modern versions sinks and china pedestal sink siphons are mainly plastic but sometimes you can still see the metal (iron, steel or nickel-plated). Traps are placed in order to create a barrier to odors which can penetrate from the sewer into the room. Construction of siphons is different.
The shell is mounted on the support, pedestals or fastened by means of two brackets that attach to the wall dowels. The distance between the brackets is determined by the size of the shell. The distance from the floor is selected arbitrarily. If the sink is mounted on a pedestal, connect it to the water supply is best long tubes so they can be fit into a pedestal. Then the shell is connected to the trap: the release is inserted into the hole in the plate. To compound turned tight, the top ring under the bottom of the issue and put annular rubber gaskets.
The siphon metal is connected to the branch pipe special pipe of diameter 32 mm. Some model siphons for this purpose include the coupling diameter nuts. Thereafter the shell is fixed on the bracket; the second end is inserted into the siphon sewer pipe and sealed. If the drain china pedestal sink hole is not joined to the drainage pipe, use the connection by means of a plastic tube with a diameter of 38 mm and they do not connect vertically at a slight slant. This is done in several ways. For example, a bundle of tow firmly placed in the gap between the end of the siphon and the drainage pipe and all poured cement. In order to give strength pouring, it is laid on top of the gauze and then poured cement liquid solution. In addition, the market today there are special rubber seals which are more convenient to use as they can at any time be removed and replaced.
Then attach the sink faucets. When buying a mixer pay attention to whether it is intended for the kitchen or bathroom. Crane is inserted into the shell hole from underneath the nuts lay rubber seal then the entire structure is screwed to the pipe adapters.